U.S. Geological Survey
20170329
USGS US Topo 7.5-minute map for Pillar Butte SE, ID 2017
map, raster digital data
Rolla, MO and Denver, CO
USGS - National Geospatial Technical Operations Center (NGTOC)
U.S. Geological Survey
2018
US Topo Historical
https://www.sciencebase.gov/catalog/item/5061bc99e4b0ce47085a8d03
Layered geospatial PDF Map. Layers of geospatial data include orthoimagery, roads, grids, geographic names, elevation contours, hydrography, and other selected map features.
This map depicts geographic features on the surface of the earth. It is a general purpose map for users who are not GIS experts. One intended purpose is to support emergency response at all levels of government. The geospatial data in this map are from selected National Map data holdings and other government sources.
GNIS Cell ID = 35154; {"inventory":"91e49544-1039-50ea-e44b-b68eefa1bde8","cellId":35154,"scale":24000,"pageWidth":24,"pageHeight":29}
1950
2016
publication date
Irregular
-113.125
-113
42.875
42.75
ISO 19115 Topic Category
imageryBaseMapsEarthCover
EarthCover
Imagery and Base Maps
None
topographic
transportation
structures
geographic names
hydrography
boundary
Public Land Survey System
woodland
orthoimage
contour
U.S. National Grid
Geographic Names Information System
US
United States
Idaho
Power
Bingham
None
Pillar Butte SE, ID
The National Map Type Thesaurus
Downloadable Data
The National Map Theme Thesaurus
Map
The National Map Collection Thesaurus
US Topo Historical
US Topo
The National Map Product Extent Thesaurus
7.5 x 7.5 minute
The National Map Product Format Thesaurus
GeoPDF
None
This product may be freely copied, redistributed, and printed. Most content is derived from public domain data with no reuse constraints. The following data layers are from commercial sources and are not public domain: 1) orthoimages in Alaska, and 2) orthoimages in Hawaii. These layers are copyrighted and have some reuse restrictions; see the relevant data source sections (srcinfo tag) in this file. From mid 2010 to late 2015 US Topo maps used commercially licensed road data for most maps, but as of October 2015 this map series uses public domain road data from the US Census Bureau; see the credit note in the lower left corner of the map face and the metadata srcinfo tag of individual maps for road data sources and restrictions. Users should be aware that temporal changes may have occurred since these data were collected and some data may no longer represent actual surface conditions. Users should not use these data for critical applications without a full awareness of their limitations. Acknowledgment of the U.S. Geological Survey is appreciated for products derived from these data.
https://prd-tnm.s3.amazonaws.com/StagedProducts/Maps/USTopo/PDF/ID/ID_Pillar_Butte_SE_20170329_TM_tn.jpg
Thumbnail JPG image of map
JPEG
Cartographic content is derived from USGS national geospatial databases. The data is owned and hosted by the USGS, but does not preclude using data sources owned and hosted by other organizations, provided that these sources have been approved by the USGS data program.
This product is a layered geospatial PDF file.
Each layer of the geospatial PDF is extracted from the USGS national geospatial databases. These data are intended to be cartographically complete at the scales that the map is produced, 1:24,000 scale in the conterminous 48 states and Hawaii, 1:25,000 scale in Alaska, and 1:20,000 scale in Puerto Rico and the Virgin Islands.
This US Topo map product is compiled to meet National Map Accuracy Standards (NMAS). NMAS horizontal accuracy requires that at least 90 percent of well-defined points tested are within 0.02 inch of the true position. In this product, the projection line, grids, and orthoimage are believed to meet NMAS. Positional accuracy of the other data layers is less controllable because of diversity of data sources, and may not meet NMAS.
Vertical accuracy report: US Topo contours are derived from the USGS National Elevation Dataset (NED). Accuracy of the NED is inherited from various sources of digital elevation models used to populate the NED. These data sources vary in vertical accuracy depending on collection method, control accuracy and density, and local terrain relief. The overall absolute vertical accuracy of the NED, as tested against HARN control elevations, is 4.78 meters at 95% confidence level (National Standards for Spatial Data Accuracy). US Topo contours are derived from the NED to generally meet National Map Accuracy Standards (90% of well-defined points in reasonably level terrain test within one-half contour interval of the true ground elevation); however, actual vertical accuracies of individual US Topo quadrangles may not meet that standard. Quadrangles containing collar notes stating contours "May not meet National Map Accuracy Standards" are in areas where the source is known to be questionable for meeting NMAS for the stated contour interval.
National Agriculture Image Program (NAIP) administered by the Aerial Photography Field Office (APFO) for the United States Department of Agriculture and SPOT 5 satellite imagery, from SPOT Image Corporation through the Alaska Statewide Digital Mapping Initiative
20151207
Imagery
Raster digital data or Digital Orthorectified Image or NAIP Digital Ortho Photo Image or Raster digital data or Digital Orthorectified Image
For the conterminous 48 states, Puerto Rico and Virgin Islands - "An orthorectified image is a layer in every product and is provided by the USDA-FSA-APFO from the National Agriculture Image Program (NAIP) in the conterminous US. This offers the USGS a consistent image product for the conterminous 48 states, normally with a one meter resolution in natural color. The NAIP image in this product is public domain with no reuse constraints." For Alaska - "A simulated natural color, orthorectified image is provided by the Alaska Statewide Digital Mapping Initiative. The statewide orthoimagery contract was awarded to Aero-Metric, Inc. Subcontractor Spot Image provided the source imagery from their SPOT 5 satellite. Subcontractor Fugro Earthdata performed the image processing, orthorectification, and mosaicing. Further processing may have been performed by USGS. SPOT Image Corporation (SICORP) retains copyright to these data. The USGS license allows these data to be freely used and redistributed in US Topo instances (1:25,000-scale topographic maps in PDF format), provided this copyright notice is retained."
http://www.fsa.usda.gov/
http://www.alaskamapped.org/ortho
digital data
20151207
20151207
publication date
Imagery
Image
U.S. Census Bureau, Geography Division and Alaska Department of Transportation
2016
Transportation - Roads
vector digital data
For the conterminous 48 states, Puerto Rico, Virgin Islands and Hawaii - "Dataset source is Census Bureau MAF/TIGER database extracts in the form of TIGER/Line Shapefiles. The TIGER/Line shapefiles and related database files are an extract of selected geographic and cartographic information from the U.S. Census Bureau's Master Address File/Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). The MTDB represents a seamless national file with no overlaps or gaps between parts, however, each TIGER/Line shapefile is designed to stand alone as an independent dataset, or they can be combined to cover the entire nation. The U.S. Geological Survey filters Census roads to remove short road segments which are less than 500 feet in length, are not named and are classified as local roads. Census roads are not mixed with other road data sources within a 7.5-minute US Topo quadrangle with the exception of U.S. Forest Service lands, where public domain data from the Forest Service are used. The USGS National Transportation Dataset functional road classification system is applied to the Census datasets.The original TIGER/Line Shapefile products are not copyrighted however TIGER/Line and Census TIGER are registered trademarks of the U.S. Census Bureau. The horizontal spatial accuracy information present in the TIGER/Line shapefiles is provided for the purposes of statistical analysis and census operations only and the data may not be suitable for high-precision measurement applications. Full metadata for TIGER/Line shapefiles is available from U.S. Census Bureau." For Alaska - "Roads gathered from various state and local sources, integrated by the Alaska Department of Transportation (ADOT) and provided to USGS for use in USGS map products. This specific road dataset is unpublished, but earlier versions are published on the ADOT web site."
http://www.census.gov/geo/maps-data/data/tiger.html
http://www.dot.state.ak.us/stwdplng/mapping/
digital data
2015
2016
publication date
Roads - Census and Alaska Department of Transportation
Road centerlines, route numbers, road classification, street names
USFS
2016
Transportation, USFS FSTopo roads
Vector digital data
The FSTopo database was originally populated with Cartographic Feature File (CFF) data. CFF data were derived from the standard Forest Service Primary Base Series (PBS) or Single Edition Series (SES) map as part of the Forest Service National Geographic Information System Plan. PBS and SES maps were developed from the U.S. Geological Survey 1:24,000-scale, 7.5-minute topographic map series, with enhancements and regular revisions to satisfy Forest Service needs. Except in Alaska, where 1:63,360-scale maps are used, the original USGS 1:24,000-scale source maps were constructed to meet National Map Accuracy Standards, which require that 90 percent of all well-defined features shown on the map are within .02 inches of their true location. CFF data were collected using methods and the best technologies available to ensure that digitized elements were captured within .003 inches of corresponding elements shown on source maps. The USDA Geospatial Service and Technology Center (GSTC) uses the same data collection accuracy standard for additions and revisions to the data. Only maps in USDA Forest Service areas will contain USDA Forest roads.
http://www.fs.fed.us/gstc/
digital data
2012
2016
publication date
Roads - USFS FSTopo
Road centerlines, route numbers, road classification, street names
Various government agencies and volunteer organizations
2016
Recreational Trails
Vector digital data
The first recreational trails were added to US Topo maps in 2013. The data for trails come from a variety of sources. Accuracy and currency is the responsibility of the data owner; USGS evaluates the authoritativeness of the source but does not independently verify data accuracy. Trails are not complete, and will not be complete for the foreseeable future. Trails will be added as data become available from land management agencies and other authoritative sources. All recreational trails information presented on US Topo maps is public domain, though the original source data is not necessarily public domain. This metadata section documents all data sources for all maps, not this specific map. Trails listed here are not guaranteed to be present on all relevant maps, due to schedule differences between data delivery and US Topo production schedules. Feature-level metadata is not provided in the US Topo product; there is no link between a line on the map and the source of that specific trail. Notes on data sources follow --------- For the 11 National Scenic Trails (NST): Ice Age National Scenic Trail: data provided by the volunteer organization Ice Age Trail Alliance, http://www.iceagetrail.org, in cooperation with National Park Service and Wisconsin Department of Natural Resources. -- Pacific Crest National Scenic Trail: unpublished data provided by US Forest Service -- Appalachian National Scenic Trail: data published by the Appalachian Trial Conservancy, http://appalachiantrail.org/about-the-trail/mapping-gis-data, in cooperation with National Park Service -- North Country National Scenic Trail: unpublished dataset provided by National Park Service -- Arizona National Scenic Trail: data from AZGEO Clearinghouse, https://azgeo.az.gov/azgeo/, in cooperation with U.S. Forest Service -- Pacific Northwest National Scenic Trail: unpublished data provided by US Forest Service -- Natchez Trace National Scenic Trail: unpublished dataset provided by National Park Service -- Florida National Scenic Trail: data from US Forest Service, http://www.fs.usda.gov/main/fnst/maps-publications -- Selected National Parks may have trails provided by National Park Service---------- For other trail types and sources: US Fish and Wildlife Service lands: the USFWS Hiking Trails Inventory is administered by the US Department of Transportation Federal Highway Administration, and Pacific Western Technologies, LTD. The purpose of the dataset is to create a baseline inventory of all non-motorized trails on US Fish and Wildlife Service Stations. -- US Forest Service lands in Colorado: trails within National Forests are from unpublished data provided by USFS. Other US Forest Service lands: limited trails data published at http://data.fs.usda.gov/geodata/edw/. USFS data are developed from sources of differing accuracy. US Topo does not portray access and travel management information indicating which trails are managed for or open to specific modes of travel (motorized/non-motorized) or associated seasons of use. At this time relatively few USFS trails are shown on US Topo (other than selected NSTs and in Colorado, as described above). -- Selected trails in Alaska from unpublished data provided by Alaska Department of Natural Resources and various federal agencies -- The International Mountain Bicycling Association (IMBA) shares their bicycle trails data with USGS as part of an ongoing partnership. IMBA-collected trails are generally not shown inside delineated Federal lands (e.g., National Forests) on US Topo maps.
http://www.nps.gov/ncrc/programs/nts/nts_trails.html
http://www.pnts.org
http://www.fws.gov/gis/data/national/
https://www.imba.com/
http://nationalmap.usgs.gov
digital data
2006
2016
publication date
Recreational Trails
Trail centerline
Oak Ridge National Laboratory
2016
Transportation, Railroads
Vector digital data
Railroads are derived from an unpublished data set provided to USGS by Oak Ridge National Laboratory (ORNL) Geographic Information Science and Technology Group (GIST). Following is an excerpt from the GIST description of the data set; the original data contain attributes not used by US Topo: The rail lines layer represents the freight lines of the nation's railroad system. The data set covers all 50 states and the District of Columbia, as well as territories and possessions of the United States. No rail lines exist in American Samoa, Guam, Northern Mariana Islands, and the Virgin Islands of the US. Phase 1 of this product is a completed deliverable. This phase involved adding and validating network attribute data including railroad ownership, trackage and haulage rights, operational status, operating subdivisions, signaling systems, track class and traffic density. Phase 2 adjusted the topological alignment of the track using the best available remote sensing imagery. Information originally based on the Department of Transportation (DOT) Federal Railroad Administration (FRA) 1:100K rail network. The data have been updated by Oak Ridge National Laboratory (ORNL) Geographic Information Science and Technology Group (GIST).
digital data
2016
2016
publication date
Railroads - Oak Ridge National Laboratory
Main track centerlines
Various government agencies and volunteer organizations
2016
Ferry Routes
Vector digital data
The ferry route names were derived from Federal Highway Administration (Office of Highway Policy Information) data by howderfamily.com, and are used here with permission. The Federal Highway Administration, Office of Highway Policy Information report contains selected information on toll facilities in the United States that has been provided to FHWA by the States and/or various toll authorities regarding toll facilities in operation, financed, or under construction as of January 1, 2013. The report is based on voluntary responses received biennially. The ferry route lines were digitized by the USGS-NGTOC using aerial imagery and are general representations only, and not for navigation purposes.
https://www.fhwa.dot.gov/policyinformation/tollpage/t1part5.cfm
http://www.howderfamily.com/travel/united_states_ferry_map.html
digital data
2016
2016
publication date
Transportation - Ferry Routes
Ferry Routes
Federal Aviation Administration
2016
Airports
Vector digital data
Runway outlines are for Federal Aviation Administration (FAA)-recognized public and private airports in the United States. The FAA runway coordinates, FAA_RunwayID, and Airport Location Codes were used by the USGS to digitize runway outlines on recent NAIP orthoimagery. The digitized data were inspected for accuracy and completeness then loaded into the USGS national transportation database.
http://www.faa.gov
digital data
2014
2016
publication date
Transportation - Airports
runways
Alaska Department of Natural Resources (ADNR), Information Resource Management Section
2010
Trans-Alaska Pipeline
Vector digital data
This dataset is for delineation of the pipeline location on standard maps. The route of the Trans-Alaska Pipeline was received from Alyeska Pipeline Service Company via the State Pipeline Coordinator's Office. The original projection was transverse Mercator. Annotation for the pipeline was added by DNR via the annotation sub class 'PIPE'. Written permission to include these data as part of the ADNR digital base map has been received from the Alyeska Pipeline Service. To ensure distribution of the most current public information, please refer requests for data or products to the Alaska Department of Natural Resources, Information Resource Management Section. It is not recommended that the data be used at a scale larger than 1:25,000. Any hardcopies or published datasets utilizing these data sets shall clearly indicate their source. If the user has modified the data in any way they are obligated to describe the types of modifications they have performed. User specifically agrees not to misrepresent these data sets, nor to imply that changes they made were approved by the Alaska Department of Natural Resources.
http://dnr.alaska.gov/ssd/irm/index.htm for digital dataset
digital data
2010
2010
publication date
Alaska Department of Natural Resources (ADNR), Information Resource Management Section
Pipeline
State and Federal Partners, updates from The National Map Corps Volunteers
2016
Fire Stations
Vector digital data
Any location where fire fighters are stationed or based out of, or where equipment that such personnel use in carrying out their jobs is stored for ready use. Fire fighting training academies or locations are included. Fire Departments which are Mobile Units and not having a permanent location, are included, in which case their location has been depicted at the city/town hall or at the center of their service area if a city/town hall does not exist. This dataset includes those locations primarily engaged in forest or grasslands fire fighting, including fire lookout towers if the towers are in current use for fire protection purposes. This dataset includes both private and governmental entities. Locations that serve only administrative function are excluded. Locations serving both administrative and operational functions are included.
http://nationalmap.gov
digital data
2007
2016
publication date
Structures - Fire Stations
Geographic features and feature names
State and Federal Partners, updates from The National Map Corps Volunteers
2016
Hospitals
Vector digital data
Includes general medical and surgical hospitals, psychiatric, substance abuse and specialty hospitals such as Children's hospitals, cancer, maternity and rehabilitation hospitals. Other types of hospitals are included if represented in data sets provided by various partners for this compilation. Hospitals operated by the US Department of Veterans Affairs are included. Nursing homes, long term care facilities and Urgent Care facilities are generally excluded. Locations that are administrative offices only are excluded from the dataset.
http://nationalmap.gov
digital data
2005
2016
publication date
Structures - Hospitals
Geographic features and feature names
State and Federal Partners, updates from The National Map Corps Volunteers
2016
Schools
Vector digital data
The schools within this dataset are composed of Public elementary and secondary education in the US as defined and tracked by the National Center for Education Statistics (NCES), Common Core Dataset (CCD). Private schools in this dataset are composed of Private elementary and secondary education in the US as defined by the Private School Survey, NCES. The colleges and Universities are composed of postsecondary education facilities as defined by the Integrated Post Secondary Education System (IPEDS), NCES. Included are Doctoral and Research Universities, Masters Colleges and Universities, Baccalaureate Colleges, Associates Colleges, Theological seminaries, Medical schools and other health care professions, schools of engineering and technology, business and management, art, music, design, Law schools, Teachers colleges, Tribal colleges and other specialized institutions.
http://nationalmap.gov
digital data
2008
2016
publication date
Structures - Schools
Geographic features and feature names
State and Federal Partners, updates from The National Map Corps Volunteers
2016
Cemeteries
Vector digital data
The Geographic Names Information System (GNIS) is the Federal and national standard for geographic nomenclature. The U.S. Geological Survey developed the GNIS in support of the U.S. Board on Geographic Names as the official repository of domestic geographic names data, the official vehicle for geographic names use by all departments of the Federal Government, and the source for applying geographic names to Federal electronic and printed products. Cemeteries are one feature from the GNIS data base.
http://geonames.usgs.gov/
digital data
2013
2016
publication date
Structures - Cemeteries
Geographic features and feature names
U.S. Geological Survey
2016
National Cemetery
Vector digital data
National Cemeteries are under the jurisdiction of the National Cemetery Administration (NCA), U.S. Department of Veterans Affairs. The NCA provided USGS with a list of National Cemeteries to show in USGS spatial data products. Boundaries for these cemeteries for 1:24,000 scale maps were created by USGS using parcel data and aerial imagery. National Cemetery names are also stored in the USGS Geographic Names Information System (GNIS).
http://geonames.usgs.gov/
http://www.cem.va.gov/
digital data
2013
2016
publication date
National Cemetery
Geographic features and feature names
State and Federal Partners, updates from The National Map Corps Volunteers
2016
Post Offices
Vector digital data
The Geographic Names Information System (GNIS) is the Federal and national standard for geographic nomenclature. The U.S. Geological Survey developed the GNIS in support of the U.S. Board on Geographic Names as the official repository of domestic geographic names data, the official vehicle for geographic names use by all departments of the Federal Government, and the source for applying geographic names to Federal electronic and printed products. Post Offices are one feature from the GNIS data base.
http://geonames.usgs.gov/
digital data
2013
2016
publication date
Structures - Post Offices
Geographic features and feature names
State and Federal Partners, updates from The National Map Corps Volunteers
2016
Law Enforcement
Vector digital data
Includes locations where sworn officers of a law enforcement agency are regularly based or stationed, primarily local police station locations. State and federal law enforcement agencies are generally excluded from this dataset.
http://nationalmap.gov
digital data
2005
2016
publication date
Structures - Law Enforcement
Geographic features and feature names
State and Federal Partners, updates from The National Map Corps Volunteers
2016
Prisons
Vector digital data
Includes government operated prisons and facilities privately operated for the government such as medium and high security prisons and correctional institutions. Low and minimum security institutions such as local jails, prison camps, correctional farms or work farms, detention and treatment centers are excluded.
http://nationalmap.gov
digital data
2007
2016
publication date
Structures - Prisons
Geographic features and feature names
U.S. Geological Survey
2016
Geographic Names Information System (GNIS)
Vector digital data
The Geographic Names Information System (GNIS) is the Federal and national standard for geographic nomenclature. The U.S. Geological Survey developed the GNIS in support of the U.S. Board on Geographic Names as the official repository of domestic geographic names data, the official vehicle for geographic names use by all departments of the Federal Government, and the source for applying geographic names to Federal electronic and printed products.
http://geonames.usgs.gov/
digital data
2016
2016
publication date
Geographic Names
Geographic feature names
U.S. Geological Survey in cooperation with U.S. Environmental Protection Agency, USDA Forest Service, and other Federal, State and local partners. National Hydrography Dataset is a component of a comprehensive base geospatial data model.
20151207
Hydrography
Vector digital data
The National Hydrography Dataset (NHD) is a feature-based database that interconnects and uniquely identifies the stream segments or reaches that make up the nation's surface water drainage system. The high-resolution NHD was originally created using 1:24,000-scale data. State and Local Stewards are improving the data by incorporating local updates based on more current and more accurate source data. Water features in the real world are relatively dynamic and the differences at the time of data collection mean that water features may not register exactly to other layers. The hydrographic feature names contained in and displayed by the NHD are extracted and validated from the Geographic Names Information System (GNIS). Spatial objects may be filtered or generalized to achieve a 1:24,000-scale representation. -- For Alaska only, NHD data were originally captured from the 1:63,360 USGS topographic map series. These data are being continually upgraded by the USGS and partner organizations in Alaska. Currency, accuracy, and resolution therefore vary.
http://nhd.usgs.gov/
http://nhd.usgs.gov/gnis.html
digital data
20151207
20151207
publication date
Hydrography
Hydrography features and feature names
U.S. Geological Survey
2012
Gaging Stations
Vector digital data
This dataset provides the location of approximately 10,000 active stream gages maintained by the U.S. Geological Survey (USGS). This data is a subset of National Water Information System (NWIS) stream gages available in all U.S. States and Territories. Only Active stations with either Partial or Continuous records for water year 2012 are symbolized.
http://waterdata.usgs.gov/nwis/
http://waterdata.usgs.gov/nwis/rt
digital data
2012
2012
publication date
Hydrography - Gaging Stations
Hydrography features and gaging stations
U.S. Fish and Wildlife Service
2016
Wetlands - Emergent and Forest/Shrub
vector digital data
This data set represents the extent, approximate location and type of wetlands and deepwater habitats in the United States and its Territories. While the Fish and Wildlife Service produces a variety of wetland categories, only two (Emergent and Forest/Shrub wetlands as defined by Cowardin et al. (1979)) are included on US Topo Maps.The emergent wetlands depicted do not include lakes, rivers, open water ponds, deepwater marine and estuarine features or non-vegetated, farmed, intermittent and temporarily flooded wetlands. The goal is to provide a visual depiction of the approximate location and extent of Emergent and Forest/Shrub wetlands. Digital wetlands data are intended for use with base maps and digital aerial photography at a scale of 1:12,000 or smaller. Due to the scale, the primary intended use is for data display on the US Topo Maps. This data display is not intended for analysis. The map products were neither designed or intended to represent legal or regulatory products. Questions or comments regarding the interpretation or classification of wetlands can be addressed by visiting http://www.fws.gov/wetlands/FAQs.html These data were developed in conjunction with the publication Cowardin, L.M., V. Carter, F.C. Golet, and E.T. LaRoe. 1979. Classification of Wetlands and Deepwater Habitats of the United States. U.S. Department of the Interior, Fish and Wildlife Service, Washington, DC. FWS/OBS-79/31. For more information on the wetland classification codes visit http://www.fws.gov/wetlands/Data/Wetland-Codes.html. Note that coastline delineations were drawn to follow the extent of wetland features as described by this project and may not match the coastline shown in other base maps.
http://www.fws.gov/wetlands/
http://www.fws.gov/wetlands/FAQs.html
http://www.fws.gov/wetlands/Data/Wetland-Codes.html
digital data
1977
2016
publication date
Wetlands - Emergent and Forest/Shrub
Spatial information
Global Land Ice Measurements from Space initiative (GLIMS)
2012
Glaciers - Alaska
Vector digital data
The Randolph Glacier Inventory (RGI 2.0) is a global inventory of glacier outlines. It is supplemental to the Global Land Ice Measurements from Space initiative (GLIMS). Production of the RGI was motivated by the forthcoming Fifth Assessment Report of the Intergovernmental Panel on Climate Change (IPCC AR5). Updates beyond the IPCC 2012 deadlines will take the form of additions to the GLIMS Glacier Database. As resources allow, all these data will be incorporated into the GLIMS Glacier Database. The RGI data are used without alteration by the U.S. Geological Survey for US Topo maps and are not yet integrated with other hydrography features from USGS datasets. Glacier names are from the Geographic Names Information System (GNIS). RGI polygon boundaries are not shown in the US Topo representation.
http://www.glims.org/RGI/randolph.html
http://www.glims.org/RGI/RGI_Tech_Report_V2.0.pdf
50000
digital data
2010
2012
publication date
Hydrography - Glaciers
Hydrography features and glaciers
International Boundary Commission
2015
Vector digital data
U.S.-Canada National Boundary
The boundary is a digital representation of the International boundary between the United States and Canada as per the Treaty of 1908. It has been generated from a combination of recent surveys and datum conversions. It is intended for general mapping purposes only. The boundary dataset is composed of 29 segments that correspond to the original 256 boundary maps. Attributes of each segment define the scale in which the line in that area may be accurately depicted. It is produced for mapping purposes only and not intended to illustrate the boundary beyond the limits of the scale for any given segment.
http://www.internationalboundarycommission.org/
http://www.internationalboundarycommission.org/products.html#nad83
digital data
2015
2015
publication date
U.S. / Canada International Boundary
International Boundary between Canada and the United States
U.S. Geological Survey, U.S. Department of Agriculture, and the Instituto Nacional de Estadística y Geografía of Mexico.
2006
Vector digital data
U.S.-Mexico National Boundary
The international boundary between Mexico and the United States, defined as a joint venture between the U.S. Department of Agriculture (USDA) and the Instituto Nacional de Estadística y Geografía of Mexico (INEGI), resulted in an unofficial United States-Mexico boundary dataset that was further enhanced by the U.S. Geological Survey's Border Environmental Health Initiative (BEHI). With the data frame scale set to 1:5,000 in ArcMap, the center of the Rio Grande/Río Bravo was digitized using the NAIP 2004 Imagery. In areas with dense stands of salt cedar (bounding box = UL -104.714 30.038, UR -104.664 30.037, LR -104.666 29.933, LL -104.717 29.934; NAD83), the center of the channel was difficult, and sometimes impossible, to easily determine. To determine the location of the boundary, the GIS analyst compared the location of the line in the INEGI 1:250K Limite feature class with the NAIP 2004 Imagery and adjusted the boundary to the image, thus, the delineation of the international boundary is less certain in these areas. The remaining part of the border was extracted from the INEGI 1:250K Limite feature class and appended to the line feature class created along the Rio Grande/Río Bravo. The U.S. Geological Survey reviewed the original USDA data against 2007 NAIP imagery and further edited 9 line segments in the Rio Grande areas to conform to National Map Accuracy Standards.
http://borderhealth.cr.usgs.gov/projectindex.html
http://extract.cr.usgs.gov/BorderHealth/Boundaries/Int_Boundary/International_Boundary_Shapefile.zip
digital data
1972
2006
publication date
U.S. / Mexico International Boundary
International Boundary between Mexico and the United States
U.S. Department of Agriculture (USDA) Forest Service - Washington Office Automated Lands Program (ALP).
2015
Vector digital data
USDA Forest Service Boundary
The forest service boundaries defined by the USDA Forest Service encompassing the National Forest System (NFS) lands within the original proclaimed National Forests, along with lands added to the NFS which have taken on the status of 'reserved from the public domain' under the General Exchange Act. The following area types are included: National Forest, Experimental Area, Experimental Forest, Experimental Range, Land Utilization Project, National Grassland, Purchase Unit, and Special Management Area. The nationwide Proclaimed Forest dataset was created by the USDA Forest Service, Washington Office Automated Lands Program (ALP) staff from collected source data created by the Regional Offices. Only maps in USDA Forest Service areas will contain USDA Forest boundaries.
digital data
2015
2015
publication date
USDA Forest Service Boundaries
National Forest Service Boundaries
U.S. Census Bureau
2015
Vector digital data
State and Equivalent Boundary
The Census Bureau collects boundaries from state and county governments through the Boundary and Annexation Survey (BAS), and publishes the results as TIGER files. The USGS uses the TIGER data without editing or alteration for US Topo.
http://www.census.gov/geo/www/tiger/index.html
ftp://ftp2.census.gov/geo/tiger/TIGER2012/STATE/
http://www.census.gov/geo/www/bas/bashome.html
digital data
2014
2015
publication date
State Boundaries
State and Equivalent Boundary
U.S. Census Bureau
2015
Vector digital data
County and Equivalent Boundary
The Census Bureau collects boundaries from state and county governments through the Boundary and Annexation Survey (BAS), and publishes the results as TIGER files. The USGS uses Census TIGER data without editing or alteration for US Topo.
http://www.census.gov/geo/www/tiger/index.html
ftp://ftp2.census.gov/geo/tiger/TIGER2012/COUNTY/
http://www.census.gov/geo/www/bas/bashome.html
digital data
2014
2015
publication date
County Boundaries
County and Equivalent Boundary
Office of the Deputy Under Secretary of Defense for Installations and Environment, Business Enterprise Integration Directorate
2011
U.S. Military Installations, Ranges, and Training Areas
vector digital data
This dataset depicts the authoritative boundaries of the most commonly known Department of Defense (DoD) sites, installations, ranges, and training areas in the United States and Territories. These sites encompass land which is federally owned or otherwise managed. This dataset was compiled by the Defense Installation Spatial Data Infrastructure (DISDI) Program. This dataset represents the baseline for georeferenced boundaries of sites selected from the 2010 Base Structure Report. The boundary locations are intended for planning purposes only and do not represent the legal or surveyed land parcel boundaries. This list does not necessarily represent a comprehensive collection of all DoD facilities, and only those in the fifty United States and US Territories were considered for inclusion. Maps produced at a scale of 1:50,000 or larger which otherwise comply with National Map Accuracy Standards will remain compliant if this data is incorporated. Although these data have been provided by the DoD components, no warranty expressed or implied is made regarding the utility of the data on any other system, in derived products or data alterations, nor shall the act of distribution constitute such warranty.
http://www.acq.osd.mil/ie/index.shtml
http://geo.data.gov/geoportal
50000
digital data
2011
2011
publication date
U.S. Department of Defense Military Installations
Boundary lines, installation names
National Park Service - Land Resources Division
2015
National Park Service Boundary
Vector digital data
This dataset depicts National Park Service unit boundaries for display and general analysis purposes. The USGS converted areas of generally 3 acres or less to point features to facilitate cartographic display on the US Topo digital map product. See Source URL for link to complete dataset. This data set is complete but subject to continual updates to reflect boundary amendments, legislation, and acquisitions, and improved processing techniques. The data is being regularly updated with verified boundaries from NPS Land Resources Division. The data is intended for use as a tool for display and general GIS analysis purposes only. It is in no way intended for engineering or legal purposes. The data accuracy is checked against best available sources which may be dated. NPS assumes no liability for use of this data. Boundaries from the Land Resources Division have separate polygons for each type of unit. For example Denali National Park and Denali National Preserve are separate individual polygons.
https://irma.nps.gov/App/Portal
digital data
2002
2015
publication date
National Park Service Boundary
Current Administrative Boundaries of the National Park System Units
US Fish and Wildlife Service
2016
Simplified FWS Boundaries
Vector digital data
This data set depicts simplified boundaries of lands administered by the U.S. Fish and Wildlife Service including National Wildlife Refuges, National Fish Hatcheries, FWS administrative sites, and other conservation areas. The Alaska National Wildlife Refuge Boundaries data set depicts the legislative boundary of the 16 National Wildlife Refuges in Alaska at a source scale of 1:63,360. The dataset was created by the U.S. Fish and Wildlife Service, Region 7, Division of Realty and Natural Resources. The USGS substituted the Alaska National Wildlife Refuge boundaries for the USFWS Simplified Wildlife Refuge Boundaries in Alaska for cartographic purposes. The USFWS Simplified Wildlife Refuge Boundaries are simplified from the U.S. Fish and Wildlife Service Real Estate Interest data layer containing polygons representing tracts of land (parcels) in which the Service has a property or management interest. These interests include full land ownership, secondary interests in property primarily managed and reported by other federal agencies, leased property, property managed by agreement with other parties, and, within National Wildlife Refuges, property governed by conservation easements. A conservation easement is a permanent, legally enforceable land preservation agreement between a landowner and a government agency that restricts real estate, commercial and industrial development of the land, which remains private property. Inholdings of private property within Refuge areas not covered by conservation easements are excluded from these boundaries. The Hawaiian Islands National Wildlife Refuge and Waterfowl production area easements acquired through the small wetlands program have been omitted. Interior boundaries between parcels were dissolved to produce a single set of simplified external boundaries for each feature. These are resource grade mapping representations of the U.S. Fish and Wildlife Service boundaries. For legal descriptions of the land represented here contact the USFWS Realty Office. This map layer was compiled by the U.S. Fish and Wildlife Service. The Alaska National Wildlife Refuges dataset was derived from the following digital sources and legal documents: 1) Federal Register, Vol. 48, No. 38 Thursday, February 24, 1983 Notices Pages 7890-8029. 2) USGS 1:250,000 scale Alaska Boundary Series maps entitled: Alaska National Interest Lands Conservation Act December 2, 1980 P.L. 96-487 3) Various legal documents such as survey plats, legal metes and bounds descriptions, Deeds, and Titles. 4) USGS 1:63,360 scale revised hydrography Digital Line Graphs depicting ground conditions from 1955 to 1986. Although these Fish and Wildlife boundaries represent lands administered by the U.S. Fish and Wildlife Service, not all areas are open to the public. Some fragile habitats need to be protected from human traffic, some management areas are closed, and the terms of some conservation easements preclude public access. The public is urged to contact specific Refuges or other conservation areas before visiting.
http://www.fws.gov/GIS/data/CadastralDB/FWS_Simplified_Boundaries.zip
63360
digital data
1950
2016
publication date
U. S. Fish and Wildlife Service Boundary
Boundary polygons and names
U.S. Department of Commerce, U.S. Census Bureau, Geography Division
2012
Metlakatla Alaska Boundary
Vector digital data
This boundary depicts Metlakatla, AK, referred to as Annette Island in the Census AIANNH shapefile NAME attribute. The area is home of the Metlakatla Indian Community. The Census Bureau TIGER Line shapefiles and related database files are an extract of selected geographic and cartographic information from the US Census Bureau's Master Address File-Topologically Integrated Geographic Encoding and Referencing -MAF-TIGER- Database. The 2010 Census boundaries for federally recognized American Indian reservations and off reservation trust lands are as of January 1, 2010, as reported by the federally recognized tribal governments through the Census Bureau's Boundary and Annexation Survey. No warranty, expressed or implied is made with regard to the accuracy of these data, and no liability is assumed by the U.S. Government in general or the U.S. Census Bureau in specific as to the spatial or attribute accuracy of the data. The act of distribution shall not constitute any such warranty and no responsibility is assumed by the U.S. government in the use of these files. The boundary information in the TIGER-Line Shapefiles is for statistical data collection and tabulation purposes only. Their depiction and designation for statistical purposes do not constitute a determination of jurisdictional authority or rights of ownership or entitlement and they are not legal land descriptions.
http://www2.census.gov/geo/tiger/TIGER2012/AIANNH
63360
digital data
2011
2012
publication date
Metlakatla, AK boundary from TIGER Line Shapefile 2012, nation, U.S., Current American Indian/Alaska Native/Native Hawaiian Areas (AIANNH) National
Boundary polygons and names
Bureau of Land Management
Unknown
Alaska Bureau of Land Management Boundary
Vector digital data
Selected BLM unit boundaries were provided to USGS by BLM Alaska State Office as unpublished datasets. The dataset is for general mapping purposes for use on the Alaska US Topo product. These boundaries include National Petroleum Reserve, Steese National Conservation Area, White Mountains National Recreation Area. Other BLM units in Alaska are not shown on US Topo maps as of this date, though more will be shown in the future. Any hardcopies or published datasets using this data shall clearly indicate their source. Any users wishing to modify this data are obligated to report the extent of their modifications. User specifically agrees not to misrepresent modification to this data as approved or endorsed by the BLM. No warranty is made by the Bureau of Land Management as to the accuracy, reliability, or completeness of these data for individual use or aggregate use with other data.
http://www.blm.gov/ak/st/en.html
63360
digital data
Unknown
Unknown
publication date
Bureau of Land Management Boundary
Boundary polygons
U.S. Dept. of Interior, Bureau of Land Management, Division of Support Services, Branch of Information Resource Management
2015
Public Land Survey System
Vector digital data
The Public Land Survey System (PLSS) information shown on these maps is for general reference purposes only and should not be used to determine legal boundaries or land ownership. US Topo maps are not legal documents. The Bureau of Land Management (BLM) is the authoritative source for PLSS information at the federal level. The US Topo representation is derived from BLM GIS data files. Although this metadata record is included with all maps, PLSS is shown on US Topo maps for only states that have PLSS. Metadata for BLM PLSS data can be located through http://nationalcad.org/PLSSWorkgroup/PLSSWorkgroup.html. Note: Alaska PLSS consists of protracted (computed, not surveyed) data only. Section boundaries were generated from geodetic latitude and longitude coordinate pairs as recorded on BLM's official protraction diagrams of the state of Alaska. Metadata for Alaska PLSS is at http://sdms.ak.blm.gov/sdms/data_protracted_grid_gis.html.
http://nationalcad.org/PLSSWorkgroup/PLSSWorkgroup.html
http://sdms.ak.blm.gov/sdms/data_protracted_grid_gis.html
digital data
2015
2015
publication date
Public Land Survey System - BLM
Townships and ranges, sections
USGS - National Elevation Dataset is a component of a comprehensive base geospatial data model.
20020801
Hypsography
Vector digital data
This contour featureclass was generated from the 1/3 arc-second version of the National Elevation Dataset (NED). The intended viewing scale for these features is 1:24,000. The contours are derived from a filtered elevation raster to achieve smoother arcs. The NED data were modified by the National Hydrography Dataset (NHD) flow lines and water bodies to facilitate improved integration between the hypsography and hydrography on USGS map products. These contours were generated primarily for use as a layer in GeoPDFs created in the US Topo digital mapping program. The raster data source of contours is the National Elevation Dataset (NED) 1/3 arc-second layer. The 1/3 arc-second NED contains resampled data from the 1/9 arc-second layer of NED. Secondary datasets include the high resolution flow lines, water bodies, and areas from the National Hydrography Dataset (NHD). The NHD layers are used in hydro-enforcement of the DEM prior to contour generation. The goals of the hydro-enforcement are to prevent contour lines from extending over the surface of water bodies and to align the contour reentrants with the NHD single-line streams. The NED raster cells are converted to points. Those points, along with the NHD flow lines are input into an interpolation tool to create a new surface. The NHD water bodies and areas are preprocessed to attach the minimum and maximum elevation to each polygon. From these precalculated values, an appropriate value is calculated by which to raise the elevation cells under the NHD polygons. The NHD polygons are then converted into rasters, which in turn will be used to generate a mosaic that includes the new raster surface. The mosaic is filtered to provide smoother contour lines. Contours are generated and depression and index contours are identified. There is no guarantee or warranty concerning the accuracy of the data. Users should be aware that temporal changes may have occurred since these data were collected and generated and that some parts of these data may no longer represent actual surface conditions. Hydro-enforcement and generalization can also significantly alter the spatial characteristics of the contours. Users should not use these data for critical applications without a full awareness of its limitations.
http://ned.usgs.gov/
digital data
20020801
20020801
publication date
Hypsography
Contours
U.S. Geological Survey
2016
Land Cover - Woodland
Vector digital data
The Woodland Tint is a derivative land cover product created using three National Land Cover Database (NLCD) 2011 raster layers (Tree Canopy, Imperviousness, and Land Cover) and two vector layers (National Hydrography Dataset and Transportation). The process begins with masking the NLCD 2011 Tree Canopy Data cartographic with NLCD 2011 Imperviousness (values from 1-100), and NLCD 2011 Land Cover (value 11 = Open Water). The resulting raster data with canopy values of 20 and greater are converted to woodland vector polygons and smoothed via the Paek Algorithm. The woodland polygons are masked with buffered Transportation (Roads, Airport Runways, and Railroads) and Hydrography (NHD Areas excluding Inundation Area and NHD Waterbodies excluding Swamp/Marsh). The resulting polygons are checked for scale appropriate size (minimum size of one acre), and the small woodland polygons as well as small clearings within the woodland polygons are deleted. For Hawaii and Puerto Rico, the Woodland Tint is a derivative land cover product created using two National Land Cover Database (NLCD) raster layers (Tree Canopy 2011 and Imperviousness 2001): and two vector layers (National Hydrography Dataset and Transportation). The resulting raster data is converted as with CONUS to produce the polygon vector data. For Alaska, the Woodland Tint is a derivative land cover product created using one raster layer, National Land Cover Database (NLCD) 2011 (Land Cover) and two vector layers (National Hydrography Dataset and Transportation). The process begins with combining three NLCD 2011 Land Cover V1 Classes (41 - Deciduous Forest, 42 - Evergreen Forest, and 43 - Mixed Forest). The resulting raster data was converted to woodland vector polygons, and smoothed via the Paek Algorithm. The woodland polygons are masked with buffered Transportation (Roads, Airport Runways, and Railroads) and Hydrography (NHD Areas excluding Inundation Areas and NHD Waterbodies excluding Swamp/Marsh). The resulting polygons are checked for scale appropriate size (minimum size of one acre), and the small woodland polygons as well as small clearings within the woodland polygons are deleted.
http://nationalmap.gov
digital data
2016
2016
publication date
Land Cover - Woodland
National Landcover Dataset; National Hydrography Dataset; National Transportation Dataset
U.S. Geological Survey
20020801
Shaded Relief
raster digital data
The Shaded relief is a derivative elevation product created from the National Elevation Dataset (NED) 1/3 arc second. First there are five separate shaded relief datasets created from the original data. Each shaded relief has different azimuths and altitude values as follows: 00 450, 1350 600, 2700 450, 3150 450, 450 450. These five datasets are then combined into one feature class using map algebra to compute the raster layers using the following equation shadedrelief1 + shadedrelief2 + shadedrelief3 + (shadedrelief4 x 2) + shaded relief5 \ 6. This equation gives double importance to the 3150 azimuth and 450 elevation.
digital data
20020801
20020801
publication date
Imagery Shaded Relief
National Elevation Dataset
Federal land management agencies
2016
Points of Interest
vector digital data
Includes campgrounds, trailheads, visitor centers. Point data was provided by various federal agencies, such as NPS, US Forest Service, BLM, US FWS.
http://nationalmap.usgs.gov
digital data
2016
2016
publication date
Structures - various
Geographic features and feature names
U.S. Geological Survey
2012
Grids and Coordinate System
Geographic Coordinate, U.S. National Grid, UTM grid, and State Plane Coordinate System values are displayed along the map projection. State Plane Coordinate System State and Zone values are abbreviated per Appendix A in the following document: Stem, J.E., 1990, 'State Plane Coordinate System of 1983', NOAA Manual NOS NGS 5, available at http://www.ngs.noaa.gov/PUBS_LIB/ManualNOSNGS5.pdf.
raster data
2013
2013
publication date
Grids and Coordinate Systems
2.5-minute geographic ticks, U.S. National Grid, UTM grid, State Plane Coordinate System ticks.
The geospatial PDFs for this product are created as follows. All geospatial content is taken from national geospatial databases under the stewardship of USGS data programs. The NAIP and SPOT imagery is provided by a seamless tile service that delivers image data at a predetermined resolution and quality. The raster and vector data, including grids and collar information, are processed using ESRI ArcGIS software and exported as a geospatial PDF using ESRI ArcGIS software. Map formatting is performed using a custom application, which includes post-processing to embed the metadata XML document and legend. Any use of trade, product, or firm names in this publication is for descriptive purposes only and does not imply endorsement by the U.S. Government.
20170329
Raster
Universal Transverse Mercator
12
0.9996
-111
0.0
500000
0.0
coordinate pair
2
2
meters
North American Datum of 1983
Geodetic Reference System 80
6378137
298.2572221
North American Vertical Datum of 1988
3
meters
Explicit elevation coordinate included with horizontal coordinates
This is a general-purpose design and layout map based on the traditional USGS quadrangle cells. The domain for the conterminous 48 states, plus Hawaii, Puerto Rico and the Virgin Islands is a standard 7.5-minute cell. Due to the convergence of longitudes, in Alaska cell size will vary as noted: south of 59 degrees N latitude = 7.5' x 10' (N-S by E-W), 59 to 62 degrees N latitude = 7.5' x 11.25', 62 to 68 degrees N latitude = 7.5' x 15', and north of 68 degrees N latitude = 7.5' x 18'. In the conterminous 48 states plus Hawaii, the scale is 1:24,000, while in Alaska the scale is 1:25,000 and in Puerto Rico and the Virgin Islands the scale is 1:20,000.
National Geospatial Program US Topo Product Standard, 2011.
U.S. Geological Survey
mailing and physical
Box 25046 Denver Federal Center
Lakewood
CO
80225
1-888-ASK-USGS (1-888-275-8747)
usgsstore@usgs.gov
Downloadable Data
Although these data have been processed successfully on a computer system at the U.S. Geological Survey, no warranty expressed or implied is made regarding the accuracy or utility of the data on any other system or for general or scientific purposes, nor shall the act of distribution constitute any such warranty. This disclaimer applies both to individual use of the data and aggregate use with other data. It is strongly recommended that these data are directly acquired from a U.S. Geological Survey server, and not indirectly through other sources which may have changed the data in some way. It is also strongly recommended that careful attention be paid to the contents of the metadata file associated with these data. The U.S. Geological Survey shall not be held liable for improper or incorrect use of the data described and/or contained herein.
GeoPDF
18.87844
https://prd-tnm.s3.amazonaws.com/StagedProducts/Maps/USTopo/PDF/ID/ID_Pillar_Butte_SE_20170329_TM_geo.pdf
None
20210712
U.S. Geological Survey, National Geospatial Technical Operations Center
Not Provided
mailing and physical
1400 Independence Road
Rolla
MO
65401
mailing and physical
Box 25046 Denver Federal Center
Lakewood
CO
80225
1-888-ASK-USGS (1-888-275-8747)
http://www.usgs.gov/ask/
Monday through Friday 8:00 AM to 4:00 PM
Metadata information can also be obtained through online services using The National Map Viewer, at http://nationalmap.gov or EarthExplorer, at http://earthexplorer.usgs.gov or Ask USGS at http://www.usgs.gov/ask.
FGDC Content Standard for Digital Geospatial Metadata
FGDC-STD-001-1998